PRODUCT CENTER
FHS-1200 铝箔多功能双色龙门复合机
详细描述
● 多功能干湿式复合机适用于镀铝膜、镭射膜、铝箔和纸复合，可同时进行湿式复合、纸背面涂布及复合纸或转移膜剥离后表面上色，同时兼剥离卷取，然后干燥、冷却并且收卷等功能。
● 多功能复合机由纸放卷部、纸牵引部、第一膜放卷部、湿式复合部、背面涂布部、组合式烘道、第一冷却剥离部、第一膜收卷部、上色涂布部、印刷部、纸收卷部、电气控制部共十二部分组成。
● 机组湿式涂布头采用三辊上胶形式，背涂、及上色涂布头机构采用本公司最新开发的新型涂布头，设计独特，三维均可方便调节及附有减震机构，运行平稳精度高。
● 收卷采用气动跟踪式收卷方式；自动锥度张力控制，确保收卷质量。
● 烘箱系统采用热风循环组合式烘道，烘干彻底、高效率低功耗。
参数规格
技术参数 Technical parameter | 技术参数 Technical parameter |
放卷最大有效宽度 Maximum effective width of unwinding | 1300mm |
适用基材 Applicable substrate | 衬纸28-120g/m2 、铝箔0.0045-0.010mm、PET、OPP镭射膜0.012-0.025mm等 Backing paper 28-120g / m2, aluminum foil 0.0045-0.010mm, pet, OPP laser film 0.012-0.025mm, etc |
电子轴双色套印，同步电机驱动，配套相应控制器控制 Electronic axis two-color overprint, synchronous motor drive, matching the corresponding controller control | 双色套印精度≤±0.1mm Two color overprint accuracy ≤± 0.1mm |
基材宽度 Substrate width | 最大1250mm（10＊114mm） Maximum 1250mm (10 * 114mm) |
纸放卷直径 Paper unwinding diameter | ≥φ1200 mm(max) ≥φ1200 mm(max) |
铝箔、膜收放卷 Rolling and unwinding of aluminum foil and film | φ600mm(max) φ600mm(max) |
单工位气动夹紧，自动上料，独立光电纠偏 Single station pneumatic clamping, automatic feeding, independent photoelectric correction | / |
铝箔交叉式放卷、独立可调整放卷张力与光电自动纠偏 Aluminum foil cross unwinding, independent adjustable unwinding tension and photoelectric automatic deviation correction | 纠偏精度≤±0.15mm Deviation correction accuracy ≤± 0.15mm |
成品收卷直径具有气动卸料机构、自动下卷 The finished product winding diameter has pneumatic unloading mechanism and automatic unwinding | φ1320 mm(max) φ1320 mm(max) |
收卷前铝箔纸经分切工位，分切纠偏精度≤±0.15mm，分切后两卷同步收卷 Before rewinding, the aluminum foil passes through the slitting station, and the slitting correction accuracy is less than ± 0.15mm. After slitting, the two rolls are rewound synchronously | / |
收、放卷纸管内径 Inner diameter of take-up and take-off tube | 3英寸 3 inches |
粘合剂 Adhesive | 水溶性 Water solubility |
色层涂液 Layer coating solution | 溶剂性/水溶性 Solvent / water soluble |